THE FLUID FLOW SIMULATION THROUGH TO A CONVERGENT NOZZLE

IONEL OLARU

Abstract

In this work it was performed a fluid flow study of lubricant and cooling systems in machining process. In machine tools industry is very important to reduce the costs when are using the lubricant and coolant fluids to increase the productivity. It was been performed a simulation of the fluid flow through a nozzle, that nozzle type is commonly used for pressure cooling of the machined area. In these types of nozzles can be made a mixture of two types of fluids, such as air and water, to increase machined productivity and decrease the quantity of lubricant used for cooling systems.

Keywords

fluid, pressure, velocity, jet, nozzle

References

White, F.M., Fluid Mechanics, Fourth Edition, McGraw-Hill Series in Mechanical Engineering, University of Rhode Island, 2001.

Bloomer, J.J., Practical Fluid Mechanics For Engineering Applications, Marcel Dekker Inc., New York, ISBN 0-8247-9575-X, 2000.

Kurnosov, N.E., Tarnopolskii, A.V., Air–Liquid Lubricant and Coolant Aerosols in Machining, Russian Engineering Research, vol. 27, no. 10, 2007, p. 689–691.

Lewis, W.R., Nithiarasu, P., Seetharamu, N.K., Fundamentals of the Finite Element Method for Heat and Fluid Flow, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England, 2004.

Florescu, I., Florescu, D., Olaru, I., Mecanica fluidelor şi maşini hidraulice. Îndrumar de laborator, Editura Tehnica Info Chişinău, 2003.

Florescu, I., Mecanica fluidelor şi maşini hidropneumatice, Editura Alma Mater Bacău, 2000.

Refbacks

  • There are currently no refbacks.