STRESS AND DEFORMATIONS IN TOROIDAL SHELLS WITH ELLIPTICAL TRANSVERSAL SECTION

RADU IATAN, GHEORGHIŢA TOMESCU, ION DURBACĂ

Abstract

The article approaches the analysis of stress and deformation states; in the toroidal shell with the elliptical cross section with two specific positions, relative to the axis of symmetry. The internal pressure of a working environment as well as the effect of its temperature are considered external loads. The two effects may overlap taking into account the elastic state of the shell material.

Keywords

Stress, deformations, toroidal shells, external loads

Full Text:

PDF

References

Kantorovici, B.Z., Osnovî rasceta himiceskâh maşin i apparatov (limba rusă), Maşghiz, Moskva, 1952.

Ponomariov, D.S., Calculul de rezistenţă în construcţia de maşini (traducere din limba rusă), vol. 2, Editura Tehnică, Bucureşti, 1963.

Domaşnev, D.A., Utilaje pentru indsutria chimică – calcul şi proiectare (traducere din limba rusă), Editura Tehnică, Bucureşti, 1963.

Gill, S.S., The stress analysis of pressure vessels and pressure vessel components, vol. 1, Pergammon Press Ltd., New York, 1970.

Renert, M., Calculul şi construcţia utilajului chimic, vol. 1, Editura Didactică şi Pedagogică, Bucureşti, 1971.

Jinescu, V.V., Calculul şi construcţia utilajului cjimic, petrochimic şi de rafinării, vol. 1, Editura didactică şi Pedagogică, Bucureşti, 1983.

Jinescu, V.V., Utilaje pentru industrii de proces, vol. 1, Editura Tehnică, Bucureşti, 1983.

Lizin, V.T., Piatkin, A.V., Proektironanie tonkostennâh konstrukţii, Maşinostroenie. Moskva, 1985.

Gallethy, G.D., Blechut, J.M., Torisferical shells under internal pressure – failure due to asymmetric plastic buckling or axisymmetric yielding, Proc. Instn. Mech. Engrs., 199, nr. C 3, 1985. p. 225 – 238.

Blackler, J.M., Stability of silos and tanks under internal and external pressure, Thesis, The University of Sydney, Oct. 1986.

Vu, Tr.V., Blachut, J., Plastic instability pressure of toroidal shells, Journal of Pressure Vessel Technology, Transactions of the ASME, vol. 138, no. 2, 2015. (http://pressurevesseltech.asmedigitalcollection.asme.org/article.aspx?articleid=1473498, on line at 11.07.18).

Vu, Tr.V., Optimum shape of constant stress toroidal shells, Journal of Pressure Vessel Technology, Transactions of the ASME, vol. 135, no.2, 2013. (https://www.researchgate.net/publication/257984913_Optimum_Shape_Of_Constant_Stress_Toroidal_Shells - on line at 11.07.18).

Vu, Tr.V., Minimum weight design for toroidal shells with strengthening component, Journal of Pressure Vessel Technology, Transactions of the ASME, vol. 138, no. 2, 2016. (http://pressurevesseltech.asmedigitalcollection.asme.org/article.aspx?articleid=2499940 - on line at 11.07.18).

Iatan, I.R., Nicolau, L., Evaluarea influenţei racordării între virolele tronconice şi cilindrice asupra stării de tensiuni, Buletinul Institutului Politehnic Bucureşti, vol. 50, 1988, p. 57 – 64.

Avdonin, S.A., Prikladnâe metodî rasceta obolociek i tonkostennâh konstrukţii, Izd. “Maşinostroenie”, Moskva, 1969.

Iatan, I.R., Elemente de teoria liniară a elasticităţii corpurilor de rotaţie (manuscris), Bucureşti, 2019.

Refbacks

  • There are currently no refbacks.