SHIELDING OF NOISE SOURCES USING ACOUSTIC SCREENS COMPOSED

Main Article Content

CLAUDIA TOMOZEI
OANA IRIMIA
MIRELA PANAINTE-LEHADUS

Abstract

The paper presents some experiments in which was used acoustic screens performed in two combinations of material layers. First variant of experimentation was the one in which the walls of the acoustic screens were performed by alternating the layers of OSB - mineral wool – plasterboard. In the second variant was used the combination layers of OSB - mineral wool - corrugated cardboard. The noise level measurements were made of the acoustic screen on construction type with three walls and three walls and lid. The recordings of the noise level were achieved by positioning the source in 4 measuring points and the microphone (receiver) in 16 points. Measurement results showed the best variant of work.

Article Details

How to Cite
TOMOZEI, C., IRIMIA, O., & PANAINTE-LEHADUS, M. (2020). SHIELDING OF NOISE SOURCES USING ACOUSTIC SCREENS COMPOSED. Journal of Engineering Studies and Research, 26(1), 80-85. https://doi.org/10.29081/jesr.v26i1.12
Section
Articles

Most read articles by the same author(s)

1 2 > >>