APPROACH TO ADJUSTING LAMPS’ HEIGHTS AND ANGLES: DESIGN AND IMPLEMENTATION OF AN ELEVATING DEVICE FOR ILLUMINATION IN SLEDGE TESTS

Main Article Content

ZHE WEI
HAITAO ZHANG
JINLONG GONG
YI QIANG
FADHLIYAH MUHAMMAD YUSUF

Abstract

In order to achieve the aim of adjusting heights and angles of lamps in sledge tests, detailed requirements were analyzed, and the implementation scheme was devised. The prototype of the elevating device was designed to validate the effect. Both the power circuit and the control circuit were researched on to power and control the 4 3-phase asynchronous motors respectively. An effective solution was provided to the adjustment of the essential parameters in sledge tests’ illumination. Manual control and remote control modes were both designed and employed to make the necessary adjustments possible. On-site application validated that the elevating device was effective and could be used to adjust parameters relevant with lamps’ spatial positions.

Article Details

How to Cite
WEI, Z., ZHANG, H., GONG, J., QIANG, Y., & YUSUF, F. M. (2022). APPROACH TO ADJUSTING LAMPS’ HEIGHTS AND ANGLES: DESIGN AND IMPLEMENTATION OF AN ELEVATING DEVICE FOR ILLUMINATION IN SLEDGE TESTS. Journal of Engineering Studies and Research, 28(1), 81-89. Retrieved from https://jesr.ub.ro/1/article/view/321
Section
Articles
Author Biographies

ZHE WEI

National Quality Inspection and Testing Center for Engineering Machinery, China Academy of Machinery Science and Technology. Daxing, Beijing, China

HAITAO ZHANG

National Quality Inspection and Testing Center for Engineering Machinery, China Academy of Machinery Science and Technology. Daxing, Beijing, China

JINLONG GONG

China Certification Center for Automobile Products, China Academy of Machinery Science and Technology. Haidian, Beijing, China

YI QIANG

China Certification Center for Automobile Products, China Academy of Machinery Science and Technology. Haidian, Beijing, China

FADHLIYAH MUHAMMAD YUSUF

Faculty of Forestry, Hasanuddin University. Sulawesi Selatan, Indonesia

Most read articles by the same author(s)