ON A METHOD FOR DETERMINING THE NEUTRAL SURFACE OF THE LAMINATED MONOLITH COMPOSITES

Authors

  • RADU I. IATAN POLITEHNICA University of Bucharest, Department: Equipment for Industrial Processes, Splaiul Independentei no. 313, sector 6, Bucharest, Romania
  • GEORGIANA LUMINIŢA ENĂCHESCU POLITEHNICA University of Bucharest, Department: Equipment for Industrial Processes, Splaiul Independentei no. 313, sector 6, Bucharest, Romania
  • PAVEL GH. FLORESCU POLITEHNICA University of Bucharest, Department: Equipment for Industrial Processes, Splaiul Independentei no. 313, sector 6, Bucharest, Romania

DOI:

https://doi.org/10.29081/jesr.v22i1.121

Keywords:

layered composite, neutral surface, specific strains

Abstract

This paper approaches the methodology for determining the neutral surface of a layered composite. It is to be neglected the spins effect on normal sectional unit load, respectively the influence of the specific linear movements when calculating the bending and torsion of the unit moments. It enables the distribution of tasks specified in the layers' level for evaluating maximum stresses and comparing them to the existing structure of the materials existing in the structure.

Downloads

Download data is not yet available.

Downloads

Published

2016-03-23

Issue

Vol. 22 No. 1 (2016)

Section

Articles

How to Cite

ON A METHOD FOR DETERMINING THE NEUTRAL SURFACE OF THE LAMINATED MONOLITH COMPOSITES. (2016). Journal of Engineering Studies and Research, 22(1), 38-49. https://doi.org/10.29081/jesr.v22i1.121

Most read articles by the same author(s)