RESISTANCE TO COMPACTION/BALING OF RECYCLABLE CARDBOARD WASTE USING STATIONARY HORIZONTAL PRESSES

Main Article Content

PAULA TUDOR
BIANCA-STEFANIA ZABAVA
GHEORGHE VOICU
MIRCEA-BUCUR LAZEA
GABRIEL-ALEXANDRU CONSTANTIN

Abstract

The paper presents the resistances to the formation of a bale of recyclable cardboard, in the ten stages of its formation, up to binding, as well as on each stage separately, for the pressing phase and for the expansion phase, until the start of a new cycle, including the mass variation of the bale in formation. It also presents the energy accumulated in the bale for each phase of its formation, and the total energy required for its formation. The presented data can be used both by the builders of balers for pressing and baling recyclable waste, and by their users to make the best settings.

Article Details

How to Cite
TUDOR, P., ZABAVA, B.-S., VOICU, G., LAZEA, M.-B., & CONSTANTIN, G.-A. (2024). RESISTANCE TO COMPACTION/BALING OF RECYCLABLE CARDBOARD WASTE USING STATIONARY HORIZONTAL PRESSES. Journal of Engineering Studies and Research, 29(3), 88-95. https://doi.org/10.29081/jesr.v29i3.009
Section
Articles
Author Biographies

PAULA TUDOR

University POLITEHNICA of Bucharest, Splaiul Independentei 313, Bucharest, Romania

BIANCA-STEFANIA ZABAVA

University POLITEHNICA of Bucharest, Splaiul Independentei 313, Bucharest, Romania

GHEORGHE VOICU

University POLITEHNICA of Bucharest, Splaiul Independentei 313, Bucharest, Romania

MIRCEA-BUCUR LAZEA

RLG Waste Management Systems Romania, Calea Dorobanti 53, Bucharest, Romania

GABRIEL-ALEXANDRU CONSTANTIN

University POLITEHNICA of Bucharest, Splaiul Independentei 313, Bucharest, Romania

Most read articles by the same author(s)