AUTOMATED CUTTING TOOLS SELECTION FOR BEARINGS COMPONENTS TURNING PROCESS

Authors

  • DAN GEORGE PRUTICA “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania
  • GHEORGHE BRABIE “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania
  • BOGDAN CHIRITA “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

DOI:

https://doi.org/10.29081/jesr.v26i1.11

Keywords:

automated cutting tools selection, turning process, computer aided process planning (CAPP), bearings manufacturing

Abstract

Due to the high potential of improving efficiency and productivity in machining operations, the automated cutting tools selection and the optimization of cutting parameters has been an area of high interest for many researchers in the frame of CAPP systems development. Through the work presented in this paper an automated cutting tools selection algorithm for roughing and finishing turning has been realized. An example for turning of the outer rings for large-size single row cylindrical roller bearings has been presented to illustrate the application of the proposed algorithm and analyze the results.

Downloads

Download data is not yet available.

Downloads

Published

2020-03-12

Issue

Vol. 26 No. 1 (2020): Journal of Engineering Studies and Research

Section

Articles

How to Cite

AUTOMATED CUTTING TOOLS SELECTION FOR BEARINGS COMPONENTS TURNING PROCESS. (2020). Journal of Engineering Studies and Research, 26(1), 73-79. https://doi.org/10.29081/jesr.v26i1.11

Most read articles by the same author(s)