CONSTRUCTIVE-FUNCTIONAL AND FEM ANALYSIS OF AN OIL UOP 12 C1 PUMP

Authors

  • CAMELIA-GEORGIANA ADAMACHE Bayards Helideck Bv, Nieuw-Lekkerland, zip Code 2957 CP, Netherlands
  • GEORGIANA-ALEXANDRA MOROSANU Research Center in Manufacturing Engineering Technology (ITCM), ”Dunărea de Jos” University of Galati, 111 Domnească Street, 800201, Galati, Romania
  • NICUSOR BAROIU ”Dunărea de Jos” University of Galati, Faculty of Engineering, 111 Domnească Street, Galati, 800201, Romania

DOI:

https://doi.org/10.29081/JESR.2025.v31.i1.001

Keywords:

oil pump, Autodesk Inventor, FEM analysis

Abstract

The paper presents the constructive-functional and FEM analysis of an oil UOP 12 C1 pump, aiming at three-dimensional modeling of the assembly in Autodesk Inventor program, as well as the finite element analysis of the created graphical model, determining the minimum and maximum values for the state of stresses and displacements. The stages of creating the 3D model, the commands used in the modeling process, as well as the simulation conditions applied in the FEM analysis are detailed. The paper also includes a comparative analysis of the states of stresses and displacements of the pump, depending on the material used - aluminum or steel.

Downloads

Download data is not yet available.

Downloads

Published

2026-01-16

Issue

Vol. 31 No. 1 (2025): Journal of Engineering Studies and Research

Section

Articles

How to Cite

CONSTRUCTIVE-FUNCTIONAL AND FEM ANALYSIS OF AN OIL UOP 12 C1 PUMP. (2026). Journal of Engineering Studies and Research, 31(1), 7-18. https://doi.org/10.29081/JESR.2025.v31.i1.001

Most read articles by the same author(s)