UNCONVENTIONAL TECHNIQUE USED TO MANUFACTURE POROUS HIGH-STRENGTH GLASS FOAM

Main Article Content

LUCIAN PAUNESCU
SORIN MIRCEA AXINTE
MARIUS FLORIN DRAGOESCU
BOGDAN VALENTIN PAUNESCU
FELICIA COSMULESCU

Abstract

The paper presents experimental results obtained in the manufacturing process of porous high-strength glass foam for thermal insulation in buildings made of glass waste and kaolin clay as raw materials and dolomite as a foaming agent. The paper’s originality is the use of the unconventional microwave heating technique. The best product manufactured by this technique was that sintered at 1050 ºC using 18 wt.% kaolin clay and 3.5 wt.% dolomite. The product characteristics were: the apparent density of 0.66 g·cm-3, the thermal conductivity of 0.155 W/m·K, the compressive strength of 5.3 MPa and a microstructural homogeneity with pore size between 0.20-0.50 mm.

Article Details

How to Cite
PAUNESCU, L., AXINTE, S. M., DRAGOESCU, M. F., PAUNESCU, B. V., & COSMULESCU, F. (2021). UNCONVENTIONAL TECHNIQUE USED TO MANUFACTURE POROUS HIGH-STRENGTH GLASS FOAM. Journal of Engineering Studies and Research, 27(4), 90-99. https://doi.org/10.29081/jesr.v27i4.303
Section
Articles
Author Biographies

LUCIAN PAUNESCU

Daily Sourcing & Research SRL, 95-97 Calea Grivitei, sector 1, Bucharest 010705, Romania

SORIN MIRCEA AXINTE

Daily Sourcing & Research SRL, 95-97 Calea Grivitei, sector 1, Bucharest 010705, Romania

University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, 1-7 Gh. Polizu street, sector 1, Bucharest 011061, Romania

MARIUS FLORIN DRAGOESCU

University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, 1-7 Gh. Polizu street, sector 1, Bucharest 011061, Romania

BOGDAN VALENTIN PAUNESCU

Consitrans SA, 56 Polona street, sector 1, Bucharest 010504, Romania

FELICIA COSMULESCU

Cosfel Actual SRL, 95-97 Calea Grivitei, sector 1, Bucharest 010705, Romania

Most read articles by the same author(s)

1 2 > >>