STUDY ON THE INFLUENCE OF WEDM PROCESSING REGIMES ON THE QUALITY OF ARMOR STEEL

Main Article Content

OANA-GEORGETA GHIORGHE
CAROL SCHNAKOVSZKY
EUGEN HERGHELEGIU
CATALIN TAMPU

Abstract

The aim of the current paper is to analyze the influence of process parameters on the dimensional accuracy of parts manufactured by Ramor 550 and Ramor 400 armored steel, using the wire electrical discharge machining (WEDM). Two working regimes were used and the processing quality were quantified by measuring the dimensional accuracy of four parameters (three lengths, an angle and a radius). The obtained results emphasized that working regime 002 leaded to larger dimensional deviations compared to working regime 001. Related to the material, the dimensional deviations were larger in case of Ramor 550 armored steel.

Article Details

How to Cite
GHIORGHE , O.-G., SCHNAKOVSZKY, C., HERGHELEGIU, E., & TAMPU, C. (2022). STUDY ON THE INFLUENCE OF WEDM PROCESSING REGIMES ON THE QUALITY OF ARMOR STEEL. Journal of Engineering Studies and Research, 28(3), 49-55. https://doi.org/10.29081/jesr.v28i3.006
Section
Articles
Author Biographies

OANA-GEORGETA GHIORGHE

“Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

CAROL SCHNAKOVSZKY

“Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

EUGEN HERGHELEGIU

“Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

CATALIN TAMPU

“Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

Most read articles by the same author(s)