A STUDY ABOUT THERMAL SIMULATION IN SOLIDWORKS IN THE CASE OF DIFFERENT GEOMETRY OF THE PROCESSED PIECES BY CUTTING

Authors

  • IONEL OLARU “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania
  • CIPRIAN OLARU “Vasile Alecsandri” University of Bacau, Calea Marasesti 157, Bacau, 600115, Romania

DOI:

https://doi.org/10.29081/jesr.v25i3.28

Keywords:

thermal simulation, piece, cutting tools

Abstract

In practice, different cutting processes are encountered, each process having different characteristics. Due to the existing friction forces between the workpiece and the cutting tool, a significant amount of heat is generated. This amount of heat can be determined by experimental measurements. This paper aims to study the way in which the temperature is propagated in the workpiece, so that the phenomenon can be understood and determined how this excessive heat can be removed from the cutting area.

Downloads

Download data is not yet available.

Downloads

Published

2019-09-24

Issue

Vol. 25 No. 3 (2019): Journal of Engineering Studies and Research

Section

Articles

How to Cite

A STUDY ABOUT THERMAL SIMULATION IN SOLIDWORKS IN THE CASE OF DIFFERENT GEOMETRY OF THE PROCESSED PIECES BY CUTTING. (2019). Journal of Engineering Studies and Research, 25(3), 39-43. https://doi.org/10.29081/jesr.v25i3.28

Most read articles by the same author(s)